Rhinowares Compact Coffee Grinder To Suit Aeropress (CTN-24) – RWSHGA

The Rhinowares compact hand coffee grinder includes an adaptor so you can grind straight into an AeroPress®. This grinder is a great solution for grinding coffee on the go – for travel, work or even just at home.

Some of the features of the Rhinowares compact hand grinder include:

• Compact size – the body fits in an AeroPress®
• Quality conical ceramic burrs for consistent grind, easy cleaning and less static
• Easy adjustment for a wide range of grind types – Smooth grinding motion
• Includes a convenient and protective carry bag
• Superior particle size distribution

A couple helpful hints for adjusting the appropriate grind:

• For grind to suit Aeropress®, tighten nut all the way, then ease off half a turn
• For French Press, ease off 1.5 turns
• For a V60, tighten the burrs all the way, and then go half a turn back. Some further adjustment may be required from there depending on the specific beans used. Suggested ratio is 60g/litre.
• For a moka pot, which is somewhere between drip and espresso, adjust your grind to the finest level (adjust so that the burrs are touching) then open up a notch or two.

And some cleaning tips:

• It’s best to pull the grinder apart and give it a clean every 4 weeks or more often if you are using darker more oily roasts
• Just use warm, soapy water and an old toothbrush to remove all residual coffee
• Make sure to rinse with fresh water when finished and allow the parts to fully dry before re-assembling